Best 10 Tips for Pressure Hose Repair

Pressure hose repair

You are using your pressure washer almost on a daily basis. As a result, the pressure washer will get subjected to lots of wear and tear. This is applicable to the hose of your pressure washer as well. If you come across any issues, you will need to rush towards pressure hose repair immediately.

However, you don’t always have to consult a professional service provider to repair the issues in your pressure washer. There are some tips that you can follow in order to repair the broken pressure hose on your own. Here are 10 such useful tips that you can follow.

Keep your eyes open to locate small holes

While you are using the pressure hose, you should carefully inspect the hose on a daily basis.  While doing this, you should try to locate the small holes. That’s because holes appear as minute ones, but they expand along with time to create bigger problems. Smaller holes are easy to deal with. That’s why it is important for you to keep your eyes open to locate the small holes in your pressure hose.

Use electrical tape to seal the small holes

Once you locate a small hole in the pressure hose, you should use electrical tape in order to seal it off. This is the best method available for you to fix the small holes. You should not use any other type of tape as they are ineffective and you will not be able to end up with getting the desired results. Electric tape is usually made out of a rubber based adhesive and PVC backing.

Therefore, you will be able to get the weather resistance, insulation, and elasticity needed to cover up all the small holes in your pressure hose. All the people who go ahead with hose repair should, therefore, use electrical tape.

Turn off water before you attempt any repairs

You need to turn off the supply of water before you attempt any repairs with the pressure hose. Otherwise, you will never be able to get any positive results with a pressure hose. That’s because running water can lead you towards troubles when you are trying to implement the tape. Double check and make sure that you have turned off the supply of water before you attempt hose repair.

Don’t wrap too tightly

While applying electric tape to cover up the small holes in your pressure hose, it is important to make sure that you don’t wrap too tightly. That’s because wrapping too tightly can create an impact on water supply. If the water flow is impeded, you will not be able to get maximum productivity out of the pressure washer.

Use a hose mender to repair large holes

If you ignore the small holes in the pressure hose, they will eventually transform into large holes. You need to use a hose mender to repair those large holes. That’s because electric tape cannot deliver the best results with repairing the large holes in your pressure hose. A hose mender is a short plastic tube. It has the ability to replace the damaged section of the pressure hose. Hence, you can easily go ahead with hose repair and start using it again.

Make sure that there are no leaks after you fix the small issues

Once you seal a leak in the pressure hose, you need to double check and make sure that there are no other leaks. Otherwise, you will have to go through the hassle of repairing the leaks again. Double checking to see if all the leaks are repaired or not will be able to provide all the support to you with saving a considerable amount of time.

Couple with a new hose gasket

Another effective method available for you to fix the issues in your hose is to couple it along with a new hose gasket. If you notice water leaking from the hose couplings, this is the right method available for you to fix it. Gaskets tend to wear and tear due to continuous exposure to water. Therefore, you should think about replacing it every five to ten years.

Replace bent coupling with new hose coupling

Bent coupling is another common issue that you can get with your pressure hose. If you are dealing with this issue, you will need to replace it with a new hose coupling. If there is a bent coupling, it would loosen the watertight seal, which is located in between the hose and sprinkler. This can lead you towards a leak. You can use a new hose coupling to repair this. The replacement parts can easily be purchased from an online marketplace such as Amazon.

Use genuine replacement parts

When you are replacing the parts of your pressure hose, you need to make sure that you are using genuine replacement parts at all times. This will help you to get long lasting results out of the fix that you do. That’s because the genuine replacement parts are designed to cater to the purpose. Therefore, you can also make sure that you will not come across any unexpected surprises in the near future.

Get the help of an expert

If you notice that the issue with your pressure hose is too complex to be fixed, you should never attempt pressure washer repair on your own. It will lead you towards more damages. Hence, it is a good idea to get the help of a professional appliance repair company and get the job done.

Final Words

Now you have a clear understanding of how to proceed with pressure washer hose repair. Take a look at the issue that exists with your pressure hose and proceed with the repair work accordingly. Then you can end up with the best possible results at the end of the day.

Talon Glover

I’m a person who loves to spend time outdoors. It makes me feel good to have a great time outdoors. Along with my passion to spend time outdoors, I have been able to gather a lot of knowledge as well. I am looking forward to using that knowledge to help the people who wish to get the maximum out of their outdoor living spaces. All you have to do is to go through my blog on outdoor living. You will fall in love with each, and every fact shared out of this blog to support your outdoor living

Recent Posts